MB1 Cylinder Feature
Operating pressure: 0.05 to 1.0 MPa
Piston speed: 50 to 1000 mm/s
Air cushion: air cushion or rubber bumper
Bore size: 32 mm, 40 mm, 50 mm, 63 mm, 80 mm, 100 mm, 125 mm
Equivalent to SMC MB1, with the same appearance
Able to mount small auto switches on four surfaces
MB1 Cylinder Selection
MB1 cylinder selection methods and steps
The selection in general is this:
First you need the output calculated according to the formula of the cylinder piston area
F is required for the output
P is the system pressure
S is the piston area
n is the safety factor
The general level of the use of 0.7 cylinder, vertical use 0.5 piston area out conversion as the diameter of the piston, the cylinder diameter of general use.
Next is according to the movement distance choice cylinder stroke, if needs to press tightly, generally will eat into 3~5mm.
Then, select the installation you need according to the installation. Is it the corner seat, flange or earring installation.
Finally, choose whether you need the travel test switch and other accessories. The most important is the data of cylinder bore and stroke.
MB1 Cylinder Specifications
MB1 Cylinder Drawing
SMC MB1 Cylinder Working Principle
Determine the thrust and pull on the piston rod according to the amount of force required. When choosing MB1 cylinder, the output force of the cylinder should be slightly residual. If the diameter of the cylinder is small and the output is insufficient, the cylinder is not working properly. However, the diameter of the cylinder is too large, which not only makes the equipment bulky and expensive, but also increases the gas consumption, resulting in energy waste. During the fixture design, the increasing force should be adopted to reduce the cylinder size.
If you need a MB1 cylinder price list, please contact us by e-mail, we will give you an affordable price.
- product: MB1 Cylinder
- Brand: AIRSKY
- Email: email@example.com
- Phone: +86 13506677109
- * We can help you with all your requests, including product design, non-standard products and OEM, etc.