Angular gripper, which are used for material handling and precision assembly, offer a range of pressure and gripping force options for optimal performance regardless of application. The ability to combine a angular gripper with elements such as sensor systems, product-specific gripper fingers or plastic inserts offers increased productivity, While innovative design tweaks such as the positively guided toggle drive system allow precise, synchronized gripping for greater process reliability.
The MHW2 angular gripper can rotate back perpendicular to the gripper body for space saving and low clearance applications. While the fingers are in the 180° retracted position, the MHW2 gripper can move in an X-Y plane to the work location. Its unique seal design and construction protects from dust exposure and allows for a shorter overall body length. Equivalent to SMC MHW2 angular gripper, with the same appearance.
MHT2 angular gripper is new cylinder body allows small auto switches to be mounted on 4 surfaces; A strong and stable gripping force can be obtained through the toggle mechanism; Holds workpiece even when the air is shut down (Safety measure). MHT2 gripper bore size has 32 mm, 40 mm, 50 mm, 63 mm, equivalent to SMC MHT2 angular gripper, with the same appearance. When the gripper fingers are closed, the toggle mechanism is actuated to produce a strong and stable holding force, even when air pressure drops or is lost. The finger opening angle ranges from 28° to -3°.
MHY2 angular gripper is a compact 180-degree angular gripper, uses a cam style mechanism for a reliable gripping force. Its size and mass allow for small, lightweight tooling. The MHY2 Gripper gives you maximum installation flexibility with mounting options on 4 sides and recessed auto switch grooves on either side of the gripper. Precision reference points on body and fingers are standard. MHY2 gripper fingers can rotate back perpendicular to the gripper body for space saving where vertical clearance is limited. Equivalent to SMC MHY2 angular gripper, with the same appearance.
The finger opening angle ranges from 30° to -10° making the MHC2 angular gripper suitable for workpieces of odd shapes and where space is too tight to accommodate a parallel type gripper. MHC2 Gripper bore has 10 mm, 16 mm, 20 mm, 25 mm, equivalent to SMC MHC2 angular gripper, with the same appearance.