4V120-M5 Solenoid Valve
Position and way NO.: 5/2 WAY
Effective area: 10mm²(CV=0.56)
Port size: Air inlet=Air outlet=Exhaust=M5
Fluid: 40 micron filtered air
Operation Inside: pilot type
Operating pressure: 0.15~0.8MPa
Max.proof pressure: 1.2MPa
Temperature: 5~50℃
Allowable boltage: 10% of rated voltage
Power consumption: AC:2.5VA DC:2.5W
Coil insulation &protection grade Class: F.IP65
Electriacl entry: Lead wire or plug connector
Higest action frequency: 5 cycle/second
Shortest excitation time: 0.05 second
Equivalent to AirTac 4V130C-M5, with the same appearance
4V120-M5 Solenoid Valve Types
4V120-M5 Solenoid Valve Specifications
Dimensions
If you need a 4V120-M5 price list, please contact us by e-mail, we will give you an affordable price.
4V120-M5 Solenoid Valve Uses
1.Before installing, be sure the valve hasn’t been damaged via transportation.
2.It’s suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3.Please notice whether the installation condition accords with technical requirements (such as “voltage”, “actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.
5.Take measure to avoid vibration and frozen.
6.Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly.
7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.
8.After installing, please use the manual override to test valve first.
- product: 4V120-M5 Solenoid Valve
- Brand: AIRSKY
- Email: info@airskys.com
- Phone: +86 13506677109
- * We can help you with all your requests, including product design, non-standard products and OEM, etc.
Contact Information