2P Solenoid Valve Feature
2P series solenoid valve, it is 2/2way, direct action type.
Equivalent to Airtac 2P valve, with the same appearance.
2P valve can start working at zero differential pressure.
Popular in solar energy industry.
Engineering plastic nylon 66 valve body, small size will be more convenient for mounting.
Direct acting and normally closed type 2/2 way solenoid valve. Its high sensitivity allows it to change direction quickly.
The protection class of the coil in IP65, and the electrical entry is grommet.
2P Solenoid Valve Types
2P Solenoid Valve Specifications
2P Solenoid Valve Drawing
2P Solenoid Valve Installation & Usage
1. Before installing, be sure the valve hasn’t been damaged via transportation.
2. The coil must be pure vertical, the inlet and outlet on body must be horizontal. it’s suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3. Please notice whether the installation condition accords with technical requirements (such as “voltage”,“actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4. Take measure to avoid vibration and frozen.
5. Before using the fittings and tubes make sure they are clean. When connecting tofittings, be sure the PTFE Thread Seal Tape is used correctly.
6. To keep the dust away, Default paragraph font;Never forget to install dirt-proof boot in air intake and outlet during dismounting.
- product: 2P Solenoid Valve
- Brand: AIRSKY
- Email: email@example.com
- Phone: +86 13506677109
- * We can help you with all your requests, including product design, non-standard products and OEM, etc.